Hypertherm MicroEdge User Manual

Sensor™ THC 393
THC Speeds
THC Acceleration Rate
This parameter allows the operator to set the acceleration rate for smooth and stable movement of
the Sensor™ Torch Height Control. The higher the acceleration rate, the quicker the THC will get up
to speed. The lower the acceleration rate, the smoother the machine will position the cutting device.
Values are entered in Milligees.
Maximum THC Speed
Enter the maximum speed for the Sensor™ THC movement in inches/millimeters per minute.
THC Jog Speed
Enter a value for the desired THC jog speed.
THC Home/Fast IHS Speed
The THC Home/Fast IHS Speed entered here is used to home the torch at the top of the slide and to
quickly maneuver the torch from the selected IHS height to the plate.

Hypertherm MicroEdge Specifications

General

Brand	Hypertherm
Model	MicroEdge
Category	Control Systems
Language	English