MACHINE OPERATIONS AND CONTROLS OPERATION
3-70
Operations Before Starting Engine 3
WARNING
When starting the engine, check that the safety lock lever
is securely at the LOCK position (L).
If the control levers are not locked and they are touched by
accident when starting the engine, the work equipment
may move unexpectedly, and this may lead to a serious
accident.
1. Check that safety lock lever (1) is at the LOCK position (L).
2. Check the position of each levers.
Set the control lever to the neutral position.
3. Insert the key in starting switch (2), turn the key to the ON
position (B), then carry out the following checks.
A
To Next Page
Loading...
