OPERATION DETAILED CONTROLS AND GAUGES
3-9
Emergency Monitors 3
CAUTION
If the monitor lights up red, stop the engine immediately or run at low idle, check applicable location, then
perform necessary actions.
These items should be observed while the engine is running. If there is an abnormality, monitor for the abnormal
location lights up red and buzzer sounds, so perform action immediately.
Engine Coolant Temperature Monitor
This monitor (1) serves to warn against abnormal rise of the
engine coolant temperature.
If the temperature of the engine cooling water becomes abnor-
mally high, the monitor lamp flashes, and the overheat preven-
tion system is automatically actuated to reduce the engine
speed.
Stop operations and run the engine at low idling until the
engine water temperature gauge enters the green range.
C (1) Engine coolant temperature monitor C (2) Engine oil pressure monitor
To Next Page
Loading...
