OPERATION DETAILED CONTROLS AND GAUGES
3-11
Meter Display Portion 3
Pilot Display 3
When ignition switch is ON, the pilot display lights up when display items are functioning.
Engine Pre-heating Monitor
This monitor (1) indicates the pre-heating time required when
starting the engine at an ambient temperature below 0°C.
The monitor lamp lights up when the engine starting switch is
turned to the HEAT position and begins to flash after about 30
seconds to show that the pre-heating is completed. (The moni-
tor lamp will go off after about 10 seconds)
D (1) Engine pre-heating monitor D (4) Fuel gauge
D (2) Swing lock monitor D (5) Service meter
D (3) Engine coolant temperature gauge D (6) Display
To Next Page
Loading...
