SAFETY MAINTENANCE INFORMATION SAFETY
2-38
SAFETY MAINTENANCE INFORMATION 2
WARNING TAG
q Always attach the “DO NOT OPERATE“ warning tag to the
work equipment control lever in the operator's cab to alert
others that you are performing service or maintenance on
the machine.
Attach additional warning tags around the machine if nec-
essary.
Warning tag Part No. 09963-A1640
q North America specified
q Always attach the “DO NOT OPERATE“ warning tag to the
work equipment control lever in the operator's cab to alert
others that you are performing service or maintenance on
the machine.
Attach additional warning tags around the machine if nec-
essary.
Warning tag Part No. 09963-03000
Keep this warning tag in the tool box while it is not used. If
there is not the tool box, keep the tag in the operation manual
pocket, as the magazine box.
q If others start the engine, or touch or operate the work
equipment control lever while you are performing service
or maintenance, you could suffer serious injury or property
damage.
KEEP WORK PLACE CLEAN AND TIDY
q Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil, or other sub-
stances that will cause you to slip. Always keep the work place clean and tidy to enable you to carry out oper-
ations safely.
If the work place is not kept claen and tidy, there is the danger that you will trip, slip, or fall over and injure your-
self.
q When cleaning the ceiling window which is made of organic glass (polycarbonate), use tap water and avoid
use of organic solvents for cleaning. An organic solvent like benzene, toluene or methanol can invite a chemi-
cal reaction like dissolution and decomposition on the window glass, deteriorating polycarbonate in use.
APPOINT LEADER WHEN WORKING WITH OTHERS
q When repairing the machine or when removing and installing the work equipment, appoint a leader and follow
his instructions during the operation.
To Next Page
Loading...
Need help?
General
