OPERATION TRANSPORTATION
3-109
Loading 3
1. Load and unload on firm level ground only.
Maintain a safe distance from the edge of a road.
2. Properly apply the brakes on the trailer and put blocks
under the tires to ensure that the trailer does not move.
Make the slope of the ramps a maximum of 15°.
3. Set the travel speed switch to the Lo position.
4. Turn auto-deceleration switch (1) OFF and operate the fuel
control dial to set the engine speed to low idling.
5. Turn the swing lock switch ON to apply the swing lock.
Blocks
Block
Max. 15°
Distance
between ramps
Ramp
ON
To Next Page
Loading...
Need help?
General
