SAFETY SAFETY MACHINE OPERATION
2-25
OPERATION 2
CHECKS BEFORE OPERATION
When carrying out the checks, move the machine to a wide area where there are no obstructions, and operate
slowly. Do not allow anyone near the machine.
q Always fasten your seat belt.
q Check that the movement of the machine matches the display on the control pattern card. If it does not match,
replace it immediately with the correct control pattern card.
q Check the operation of the gauges and equipment, and check the operation of the bucket, arm, boom, travel
system, swing system, and steering system.
q Check for any abnormality in the sound of the machine, vibration, heat, smell, or gauges; check also that there
is no leakage of oil or fuel.
q If any abnormality is found, carry out repairs immediately.
To Next Page
Loading...
Need help?
General
