MAINTENANCE MAINTENANCE PROCEDURE
4-19
MAINTENANCE PROCEDURE 4
INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)4
Carry out the following maintenance only after the first 250 hours of operation on new machines.
q Replace fuel filter cartridge
For details of the method of replacing or maintaining, see the section on EVERY 500 HOURS SERVICE.
INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000
HOURS) 4
Carry out the following maintenance only after the first 1000 hours of operation on new machines.
q CHECK ENGINE VALVE CLEARANCE, ADJUST
Special tools are needed for inspection and maintenance, so contact your Komatsu distributor.
For details of the method of replacing or maintaining, see the section on EVERY 2000 HOURS SERVICE.
To Next Page
Loading...
Need help?
General
