OPERATION MACHINE OPERATIONS AND CONTROLS
3-83
STOPPING THE ENGINE 3
NOTICE
If the engine is stopped abruptly, service life of component
parts of the engine may be considerably reduced. Hence
do not stop the engine abruptly except in an emergency. If
the engine has overheated, do not try to stop it abruptly
but run it at medium speed to allow it to cool down gradu-
ally, and then stop it.
1. Run the engine at low idling for about 5 minutes to cool
down gradually.
2. Turn the key in starting switch (1) to the OFF position (A)
and stop the engine.
3. Remove the key from starting switch (1).
A
To Next Page
Loading...
Need help?
General
