To Next Page

To Previous Page

301ENGINE

WORK

THE

INDIVIDUAL

PARTS

131

RemDYinlllle

rocker

arm

200203-10

200187-10

200186-10

EV'§

••

Av5

• •

200189-10

- Remove screws e of the rocker arm shafts.

Remove

plugs

- Screw appropriate screw e into the rocker arm shafts. Pull out rocker arm

shafls

- Take

off

rocker arm

- Take the shims from the valve spring retainers and put them aside corresponding

their installation position.

- Pre-tension the valve springs using the special tool.

Valve spring compressor

(59029019000)

(

256)

Valve spring mounting device

(78029060000)

(

261)

- Remove the valve

keys

and unload the valve springs.

- Remove the valve spring retainer and valve springs.

- Pull the valve downward out of the valve guide, remove the valve stem

seal

and

valve spri

seat.

- Mark the valves corresponding to their installation position.

•

Info

I Place the valves in a carion corresponding

their installation position and

label them.