3MNGINE
ASSEMBLY
- Wrap the timing chain around the camshaft.
Push
the camshaft into the bearing
seats.
156
,/
The
camshaft.
and
cylinder
head"
markings
are
lined
up
with
each
other.
_
Info
I Ensure that the crankshaft is at top
dead
center
(TDC).
- Position camshaft support
plate.
Mount
and
tighten
screw
•.
Guideline
Screw, camshaft bearing
support
M6
10
Nm
(7.4 Ibf ft)
Loctile-
243â„¢
- Position timing chain tensioner 0 and insert
it
with
new
O-ring
•.
- Mount and tighten
plug.
with
new
seal
ring
•.
Guideline
Plug, timing chain tensioner
M24x1.5
30
Nm
(22.1 Ibf ft)
-
Remove
screw.
and
press the timing chain tensioner toward the timing chain
using the special tool.
I
Release
device for timing chain tensioner
(77329051000)
(or
p.
260)
,/
The timing chain tensioner unlocks.
-
Press
the timing chain tensioning rail against the timing chain with your hand.
_
Info
I This ensures that the timing chain tensioner is located in the optimal posi-
tion.
- Mount and tighten
screw
•.
Guideline
Screw, unlocking of timing chain ten- M10x1
10
Nm
(7.4
Ibf It)
sioner
3MNGINE
ASSEMBLY
- Wrap the timing chain around the camshaft.
Push
the camshaft into the bearing
seats.
156
,/
The
camshaft.
and
cylinder
head"
markings
are
lined
up
with
each
other.
_
Info
I Ensure that the crankshaft is at top
dead
center
(TDC).
- Position camshaft support
plate.
Mount
and
tighten
screw
•.
Guideline
Screw, camshaft bearing
support
M6
10
Nm
(7.4 Ibf ft)
Loctile-
243â„¢
- Position timing chain tensioner 0 and insert
it
with
new
O-ring
•.
- Mount and tighten
plug.
with
new
seal
ring
•.
Guideline
Plug, timing chain tensioner
M24x1.5
30
Nm
(22.1 Ibf ft)
-
Remove
screw.
and
press the timing chain tensioner toward the timing chain
using the special tool.
I
Release
device for timing chain tensioner
(77329051000)
(or
p.
260)
,/
The timing chain tensioner unlocks.
-
Press
the timing chain tensioning rail against the timing chain with your hand.
_
Info
I This ensures that the timing chain tensioner is located in the optimal posi-
tion.
- Mount and tighten
screw
•.
Guideline
Screw, unlocking of timing chain ten- M10x1
10
Nm
(7.4
Ibf It)
sioner
To Next Page
Loading...
Need help?
General
