13/BRAKE
SYSTEM
- Check that leaf
spring.
in the brake caliper and sliding
plate.
in the brake
caliper support
are
seated correctly.
- Fit the brake linings. insert the bolt. and mount the locking
split
pins.
- Operate the foot brake lever repeatedly until the brake linings
are
in contact with
the brake disc and there
is
a pressure point.
- Correct the brake fluid reservoir level to the marking
•.
1 Brake fluid
DOT
41
DOT
5.1 (
--
p.
250)
- Mount the screw
cap.
with the
membrane.
and the O-ring.
•
Info
I
Clean
up overflowed or
spilt
brake
fluid
immediately with water.
Cbackinltha
lraa
lraval
of
tha
foot
braka
lavar
Warning
Danger
of
accidents
Brake system failure.
94
- If there is
no
free travel
on
the foot brake lever, pressure builds up
on
the rear brake circuit. The rear brake can fail due
to
overheating. Adjust free travel
on
foot brake lever according to specifications.
- Disconnect spring
O.
-
Move
the foot brake lever backwards and forwards between the end stop and the
foot brake cylinder piston bracket and check free
travel
•.
Guideline
1
Free
travel at foot brake lever
13
...
5 mm
(0.12
...
0.2
in)
•
If
the free travel does not meet specifications:
- Adjust the basic position
of
the foot brake lever. (
--
p.
94)
- Reconnect spring
•.
Adjustinlthe
basic
p'osition
of
the
foot
brake
lever
Warning
Danller
of
accidents
Brake system failure.
- If there is
no
free travel
on
the foot brake lever, pressure builds up
on
the rear brake circuit. The rear brake can fail due
to
overheating. Adjust free travel
on
foot brake lever according to specifications.
13/BRAKE
SYSTEM
- Check that leaf
spring.
in the brake caliper and sliding
plate.
in the brake
caliper support
are
seated correctly.
- Fit the brake linings. insert the bolt. and mount the locking
split
pins.
- Operate the foot brake lever repeatedly until the brake linings
are
in contact with
the brake disc and there
is
a pressure point.
- Correct the brake fluid reservoir level to the marking
•.
1 Brake fluid
DOT
41
DOT
5.1 (
--
p.
250)
- Mount the screw
cap.
with the
membrane.
and the O-ring.
•
Info
I
Clean
up overflowed or
spilt
brake
fluid
immediately with water.
Cbackinltha
lraa
lraval
of
tha
foot
braka
lavar
Warning
Danger
of
accidents
Brake system failure.
94
- If there is
no
free travel
on
the foot brake lever, pressure builds up
on
the rear brake circuit. The rear brake can fail due
to
overheating. Adjust free travel
on
foot brake lever according to specifications.
- Disconnect spring
O.
-
Move
the foot brake lever backwards and forwards between the end stop and the
foot brake cylinder piston bracket and check free
travel
•.
Guideline
1
Free
travel at foot brake lever
13
...
5 mm
(0.12
...
0.2
in)
•
If
the free travel does not meet specifications:
- Adjust the basic position
of
the foot brake lever. (
--
p.
94)
- Reconnect spring
•.
Adjustinlthe
basic
p'osition
of
the
foot
brake
lever
Warning
Danller
of
accidents
Brake system failure.
- If there is
no
free travel
on
the foot brake lever, pressure builds up
on
the rear brake circuit. The rear brake can fail due
to
overheating. Adjust free travel
on
foot brake lever according to specifications.
To Next Page
Loading...
Need help?
General
