KTM 400 EXC AUS 2011 User Manual

Ol/FORK, TRIPLE CLAMP
- Mount and tighten screw •.
Guideline
Screw, top steering stem MB 17 Nm
(12.5 Ibf It)
- Check the steering head bearing play. ( .. p. 34)
Adjustinl p'lay of stearinl haad baarinl (EXC EUIAUS)
- Raise the motorcycle with the lift stand. ( .. p. 10)
- Loosen screws 0 and •.
- Loosen and retighten screw •.
Guideline
I Screw, top steering head
I M20x1.5
35
Loctile- 243'"
110 Nm (7.4 Ibf It) I
- Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
- Fully tighten screw •.
Guideline
Screw, top triple clamp MB
- Tighten screw •.
Guideline
Screw, top steering stem MB
- Check the steering head bearing play. ( .. p. 34)
20 Nm
(14.B Ibf ft)
20 Nm
(14.B Ibf ft)
Ol/FORK, TRIPLE CLAMP
- Mount and tighten screw •.
Guideline
Screw, top steering stem MB 17 Nm
(12.5 Ibf It)
- Check the steering head bearing play. ( .. p. 34)
Adjustinl p'lay of stearinl haad baarinl (EXC EUIAUS)
- Raise the motorcycle with the lift stand. ( .. p. 10)
- Loosen screws 0 and •.
- Loosen and retighten screw •.
Guideline
I Screw, top steering head
I M20x1.5
35
Loctile- 243'"
110 Nm (7.4 Ibf It) I
- Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
- Fully tighten screw •.
Guideline
Screw, top triple clamp MB
- Tighten screw •.
Guideline
Screw, top steering stem MB
- Check the steering head bearing play. ( .. p. 34)
20 Nm
(14.B Ibf ft)
20 Nm
(14.B Ibf ft)

KTM 400 EXC AUS 2011 Specifications

General

Brand	KTM
Model	400 EXC AUS 2011
Category	Motorcycle
Language	English