EasyManuals Logo

KTM 400 EXC AUS 2011 User Manual

KTM 400 EXC AUS 2011
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
13/BRAKE
SYSTEM
Cbeckinllhe
front
brake
lininp-
Warning
Danger
01
accidents
Reduced braking efficiency caused
by
worn brake linings.
- Change worn brake linings immediately.
RllmoYinl
front
brake
lininp
Warning
- Check the brake linings for minimum thickness
•.
I Minimum thickness • I
<:
1 mm
(<:
0.04
in)
•
If
the minimum thickness is less than specified:
- Change the front brake linings. (
..
p.
87)
- Check the brake linings for damage and cracking.
•
If
damage or cracking
is
visible:
- Change the front brake linings. (
..
p.
87)
Danler
of
accident
Brake system failure.
- Maintenance work and repairs must be carried out professionally.
Warning
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake pistons.
•
Info
I Make sure when pushing back the brake pistons
that
you
do not press the
brake caliper against the spokes.
- Remove locking
split
pins
.,
withdraw bolt
.,
and take out the brake linings.
- Remove cable
clip
•.
Remove
screws.
and take off brake caliper.
- Clean the brake caliper and brake caliper support.
Danger
01
accidents
Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free
of
oil and grease, and clean them with brake cleaner when necessary.
Warning
Danller
01
accidents
Reduced braking efficiency due to use of non-approved brake linings.
86
- Brake linings available from accessory suppliers are often not tested and approved for use
on
KTM
vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original
KTM
brake linings.
If
brake linings are used that differ from the originals, there is
no
guarantee that they comply with the origi-
nal license. The vehicle
no
longer corresponds
to
the condition at delivery, and the warranty is no longer valid.
- Check the brake discs. (
..
p.
72)
- Check
that
leaf spring 0 in the brake caliper and sliding
plate.
in the brake
caliper support are seated correctly.
•
Info
I The arrow
on
the leaf spring points in the rotation direction
of
the brake
disc.
13/BRAKE
SYSTEM
Cbeckinllhe
front
brake
lininp-
Warning
Danger
01
accidents
Reduced braking efficiency caused
by
worn brake linings.
- Change worn brake linings immediately.
RllmoYinl
front
brake
lininp
Warning
- Check the brake linings for minimum thickness
•.
I Minimum thickness • I
<:
1 mm
(<:
0.04
in)
•
If
the minimum thickness is less than specified:
- Change the front brake linings. (
..
p.
87)
- Check the brake linings for damage and cracking.
•
If
damage or cracking
is
visible:
- Change the front brake linings. (
..
p.
87)
Danler
of
accident
Brake system failure.
- Maintenance work and repairs must be carried out professionally.
Warning
-
Press
the brake caliper by hand
on
to the brake disc in order
to
press back the
brake pistons.
•
Info
I Make sure when pushing back the brake pistons
that
you
do not press the
brake caliper against the spokes.
- Remove locking
split
pins
.,
withdraw bolt
.,
and take out the brake linings.
- Remove cable
clip
•.
Remove
screws.
and take off brake caliper.
- Clean the brake caliper and brake caliper support.
Danger
01
accidents
Reduced braking efficiency due to oil or grease
on
the brake discs.
- Always keep the brake discs free
of
oil and grease, and clean them with brake cleaner when necessary.
Warning
Danller
01
accidents
Reduced braking efficiency due to use of non-approved brake linings.
86
- Brake linings available from accessory suppliers are often not tested and approved for use
on
KTM
vehicles. The construc-
tion and friction factor of the brake linings and therefore the brake power can differ considerably from the original
KTM
brake linings.
If
brake linings are used that differ from the originals, there is
no
guarantee that they comply with the origi-
nal license. The vehicle
no
longer corresponds
to
the condition at delivery, and the warranty is no longer valid.
- Check the brake discs. (
..
p.
72)
- Check
that
leaf spring 0 in the brake caliper and sliding
plate.
in the brake
caliper support are seated correctly.
•
Info
I The arrow
on
the leaf spring points in the rotation direction
of
the brake
disc.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 400 EXC AUS 2011 and is the answer not in the manual?

KTM 400 EXC AUS 2011 Specifications

General IconGeneral
BrandKTM
Model400 EXC AUS 2011
CategoryMotorcycle
LanguageEnglish

Related product manuals