301ENGINE
ASSEMBLY
147
- Insert pin O.
- Position oil pump
gears
•.
•
Info
I
Ensure
that the pins
are
seated properly.
- Position
washers
•.
- Mount shaft locking devices
•.
- Crank the oil pump
gears
and ensure that they
move
easily.
- Mount locking
lever.
with the
washer,
sleeve
and
spring.
- Mount and tighten
screw
•.
Guideline
Screw, locking lever
M5
6Nm
Loctile-
243'"
(4.4 Ibf ft)
-
Push
away
locking
lever.
from the shift drum locating unit
and
position the shift
drum locating unit
•.
•
Info
I
The
flat
areas
of the shift drum locating unit
are
not symmetric.
- Relieve tension from the locking lever.
- Mount and tighten
screw
•.
Guideline
Screw, shift drum locating M6
10
Nm
(7.4lbfft)
- Slide shift
shaft.
with the washer into the bearing seat.
Loctilee
243'"
-
Push
sliding
plate.
away
from the shift drum locating unit. Insert the shift shaft
all the
way.
- Let sliding
plate.
engage
in
the shift drum locating unit.
- Shift through the transmission.
301ENGINE
ASSEMBLY
147
- Insert pin O.
- Position oil pump
gears
•.
•
Info
I
Ensure
that the pins
are
seated properly.
- Position
washers
•.
- Mount shaft locking devices
•.
- Crank the oil pump
gears
and ensure that they
move
easily.
- Mount locking
lever.
with the
washer,
sleeve
and
spring.
- Mount and tighten
screw
•.
Guideline
Screw, locking lever
M5
6Nm
Loctile-
243'"
(4.4 Ibf ft)
-
Push
away
locking
lever.
from the shift drum locating unit
and
position the shift
drum locating unit
•.
•
Info
I
The
flat
areas
of the shift drum locating unit
are
not symmetric.
- Relieve tension from the locking lever.
- Mount and tighten
screw
•.
Guideline
Screw, shift drum locating M6
10
Nm
(7.4lbfft)
- Slide shift
shaft.
with the washer into the bearing seat.
Loctilee
243'"
-
Push
sliding
plate.
away
from the shift drum locating unit. Insert the shift shaft
all the
way.
- Let sliding
plate.
engage
in
the shift drum locating unit.
- Shift through the transmission.
To Next Page
Loading...
Need help?
General
