User library (presets) 99
PRO6 Live Audio System
Owner’s Manual
Copy and paste rules and restrictions
• You can only copy and paste similar functions. For example, you can’t copy the•
input EQ from one channel to the output EQ of another, as they are different.
• You can only copy and paste across similar channel types. For example, you cannot
copy from an aux and paste to a matrix.
• Copying and pasting across inputs is restricted to the input bays only.
• Channel names are not copied.
• Compressor and gate side chain listen cannot be copied.
For details of the channel parameters that are copied across, see Chapter 18 "Copy And
Paste" on page 165.
User library (presets)
The PRO6 has a user library where you can store
settings, such as for the EQ or the whole channel. For
example, you may wish to store the EQ settings of a
singer who may be called upon to perform during a
future show. You can then easily recall these EQ
settings to the appropriate channel, when required.
The settings are stored as presets, which are saved in a
library. The library files are managed via a Preset
Manager screen on the GUI. Here, you can create new
libraries, load existing libraries, save the current library
or give it a new name. You can also delete presets from the library.
Before you can save/load a preset, you need to create a new preset library or open an
existing one. To create a new one, open the Preset Manager screen (choose
home
Preset Manager) and click New. Then, after typing in the details in the
Enter new Library name window, click OK.
>> To save a preset to the user library
1 Make sure that the settings you want to save are assigned to the channel strip,
then click store preset. If the channel’s overview is displayed, all of its settings
will be saved in the preset. Otherwise, just the settings of the displayed
processing area will be saved.
2 In the Save Preset window (shown right), type in
your chosen preset name (Preset Name), your
name (Preset Author) and any note (Notes) as
necessary.
3 Click OK.
>> To load a preset
1 Make sure that the channel in which you want to
load the settings of the preset is assigned to the
channel strip, then click load preset.
2 In the Load Preset window, click the preset that you want to load.
3 Click OK.
To Next Page
Loading...
Need help?
General
