469
XL8 Live Performance System
Owner’s Manual
Appendix N: Parameters Affected By
Copy And Paste
This appendix shows the input and output channel parameters affected by copy and
paste operations, which are selected via the copy and paste buttons on the GUI (see
“Using copy and paste” on page 98).
The structure of this appendix is intended to follow the way that copy and paste
operates, that is, by channel or processing area.
Overview
The following table provides a quick reference for finding the copy and paste
parameters per channel in this appendix.
Control
area
Inputs Auxes Returns Matrices Masters
Config-
uration
“Configuration
” on page 470
“Configuration
” on page 478
“Configuration
” on page 484
“Configuration
” on page 488
“Configuration
” on page 493
Comp-
ressor
“Compressor”
on page 472
“Compressor”
on page 479
N/A “Compressor”
on page 489
“Compressor”
on page 494
Gate “Gate” on
page 474
N/A N/A N/A N/A
EQ
(GEQ)
“EQ” on
page 475
“EQ (GEQ)” on
page 480
N/A “EQ (GEQ)” on
page 490
“EQ (GEQ)” on
page 495
Bus
sends
“Bus sends” on
page 476
“Bus sends” on
page 482
“Bus sends” on
page 486
N/A N/A
Master
routing
/fader
section
“Master
routing” on
page 477
“Master
routing” on
page 483
“Master
routing” on
page 487
“Fader section”
on page 492
“Master
routing” on
page 497