About the GEQ window 141
PRO6 Live Audio System
Owner’s Manual
About the GEQ window
The Graphic EQs screen represents a virtual eight-unit rack of user-configurable GEQs.
The number of racks (shown in the Graphic EQs screen below) depends on the number
of GEQs configured on the PRO6 (see “To configure the PRO6 with the number of effects
and GEQs” on page 137).
The following table describes the elements of the GEQ window.
>> To open a GEQ unit window
In the Graphic EQs screen, click on a non-control area of the unit you want.
Section Element Description/function
Top bar Source drop-down
list
Contains a list of GEQ sources from which to
patch the GEQ.
COPY button Copy and paste function button (see Chapter
18 "Copy And Paste" on page 165).
PASTE button Copy and paste function button (see Chapter
18 "Copy And Paste" on page 165).
FLAT button Sets all of the GEQ’s faders to 0dB.
STORE PRESET
button
User library function button (see Chapter
24 "User Libraries (Presets)" on page 213).
LOAD PRESET
button
User library function button (see Chapter
24 "User Libraries (Presets)" on page 213).
(x) button Close window button.
GEQ front
panel
Not applicable See “GEQ front panel features” on page 143.
Assignable
controls
Not applicable See Chapter 19 "Assignable Controls
(I Zone)" on page 167.
Bottom bar CLOSE button Closes the GEQ window.
GEQ
window
Assignable
controls
GEQ front
panel
Top bar
Bottom bar