194 Chapter 21: Scope (Automation)
PRO6 Live Audio System
Owner’s Manual
The Recall Scope screen has a section for each of the following.
>> To open the Recall Scope screen
At either GUI screen, choose home
AutomationRecall Scope.
Selecting scope parameter sections
There are a number of ways to select the scope parameters. For example, you can
select each one singly, by channel type, control centre wide etc.
When a parameter is selected, its background changes from blue to green .
Selection is cumulative, so you can combine any of the selection/deselection functions
until all the parameter sections you want have been selected. When you have finished
the selection process, just go to the next screen you require; you don’t have to save
your selection, as it remains stored in the current condition until you alter it again.
The scope function buttons are used both for parameter selection and deselection.
The “Assignable Effects” panel allows you to choose which effects are ‘out of scene’ on
scene recall.
For details of the parameters affected by scope, see Appendix K "Parameters Affected
By Scope" on page 379.
Description
Input Channels
Aux Returns
(returns)
Aux Sends
(auxes)
Matrix
(matrices)
Masters
Variable Control
Associations (VCA
and POP groups)
Assignable Effects
(internal effects)
and Graphic EQs
Symbol
Routing Yes Yes No No No No N/A
All Yes Yes Yes Yes Yes Yes N/A
Mic Amp Yes Yes No No No No N/A
EQ Yes Yes Yes Yes Yes No N/A
Dyn Yes No Yes Yes Yes No N/A
Busses Yes Yes Yes No Yes No N/A
Mute Yes Yes Yes Yes Yes Yes N/A
Fader Yes Yes Yes Yes Yes Yes N/A
Assignable
Effect/Graphic
EQ
N/A N/A N/A N/A N/A N/A Yes
To Next Page
Loading...
Need help?
General
