Safes 191
PRO6 Live Audio System
Owner’s Manual
Safes
Important:
Safes are intended for emergency use only and are not to be confused with
scope (see Chapter 21 "Scope (Automation)" on page 193).
Safes are incorporated into the PRO6 to prevent certain controls from being recalled
with a scene. Safe activation and status are provided on both the control surface and
the GUI.
There are six types of channel safe: EQ, dynamic, mic, auto, mute and fader. Although
some types of safe are channel-specific, any channel can be made safe from off-channel
mute, fader and automation control. Also, solo (for monitor areas A and B) is always
out of scene on any channel.
Table 10: Channel and group safe areas
All of the channel safe areas, except MIC safe, have local LED status indication on the
control surface.
In/out safe status is provided in each channel/group fast strip and in the safes sections
of the overview and processing area displays of the GUI channel strip.
Selection (channels only) is via GUI only.
Channel
or Group
EQ safe DYN safe MIC safe AUTO
safe
MUTE
safe
FADER
safe
Input
channel
All EQ
functions
Compressor and gate
side chains, ON
switches and
threshold control
knobs, and all of their
functions. Also, the
INS (insert) switch
48V, stage
box control
knob,
30Hz filter
All
(including
re-patch
source)
Mute Fader and
all bus
routing/
levels
Aux All EQ and
GEQ
functions
All compressor
functions, compressor
side chain and
compressor side chain
source (GUI only)
Not
applicable
All
(including
compress
or side
chain
source
and GEQ)
Mute Fader
Return Not
applicable
Not applicable Not
applicable
All Mute Fader
Matrix All EQ and
GEQ
functions
All compressor
functions, compressor
side chain and
compressor side chain
source (GUI only)
Not
applicable
All
(including
compress
or side
chain
source
and GEQ)
Mute Fader
Master All EQ and
GEQ
functions
All compressor
functions, compressor
side chain and
compressor side chain
source (GUI only)
Not
applicable
All
(including
compress
or side
chain
source
and GEQ)
Mute
F
ader
VCA
group
Not
applicable
Not applicable Not
applicable
Not
applic-
able
Mute Fader
To Next Page
Loading...
Need help?
General
