192 Chapter 20: Scenes And Shows (Automation)
PRO6 Live Audio System
Owner’s Manual
VCA groups only have mute and fader safes, and these can only be only switched on/off
via the GUI; see “VCA and POP groups” on page 157. Mute safe status indication is
provided both on the control surface (VCA/POP group section of master bay) an in the
GUI channel strip.
>> To switch in a channel safe
In the GUI channel strip, do one of the following:
• In the overview display, click the LED of each safe you want.
• In the processing area, click the button of each safe you want.
To Next Page
Loading...
Need help?
General
