Midas PRO6 User Manual

98 Chapter 9: Basic Operation
PRO6 Live Audio System
Owner’s Manual
Configuring the inputs and outputs
Similarly to the VCA/POP groups, you can change the name and colour of each of the
inputs and outputs. This is done via the GUI at their respective sheet screens. For
configuration details, see “Configuring VCA/POP groups” on page 85.
>> To open the Input/Output Sheet screen
Do one of the following:
• At the GUI, choose homeInput ChannelsInput Sheet to open the
Input Sheet screen, or choose home
Mix & OutputsOutput Sheet to open
the Output Sheet screen.
• In the primary navigation zone, press the inputs/outputs screen access button to
open the Input Sheet screen. To open the Output Sheet screen, press it again.
Using copy and paste
The copy and paste buttons (upper-right corner of GUI) allow you to copy the
parameters of one/all of a single channel’s processing area(s) — such as the EQ,
compressor, gate etc. — and paste them to one/all of the other channels of a similar
type.
Right-clicking the copy or paste button will open their respective menu, each of which
contains full copy/paste options.
>> To copy a processing area to a channel/all channels
1 If necessary, navigate the channel’s processing area to the channel strip (see
“Navigating a processing area or mix bus to a channel strip” on page 53).
2 Click copy.
3 Do one of the following:
• To copy the processing area to another channel, select the channel and then
click paste. (As the copied parameters are still stored, you can paste to as
many channels as you want.)
• To copy the processing area to all other channels, right-click paste to open its
menu and then choose Paste To All.
>> To copy all parameters to a channel/all channels
1 If necessary, select the channel from which you want to copy all of the processing
areas.
2 Right-click copy to open its menu, and then choose Copy All.
3 Do one of the following:
• To copy the parameters to another channel, select the channel and then click
paste.
• To copy the processing area to all other channels, right-click paste to open its
menu and then choose Paste To All.

Midas PRO6 Specifications

General

Brand	Midas
Model	PRO6
Category	Recording Equipment
Language	English