System Installation 3-19
(1) Open the “[Setup] → [Print Preset]” screen.
(2) Click [Add Service] to enter the page.
(3) Select the service type and enter the service name manually.
(4) Click [OK] to return to the page.
(5) Select the target printer from the drop-down list in the “Property” box and set other
printing properties.
(6) Click [Save] to complete.
3.5.4 Installing a Wireless Printer
The system supports the wireless printer for report printing.
1. Plug the printer power cord into an appropriate outlet.
2. Power the system and the printer on.
3. Make sure the ultrasound machine and the printer are connected to the same LAN,
and turn the printer's W-LAN function on.
4. Add a wireless adapter, following the steps described in “Add network printer.” See
chapter “3.5.2 Installing a Graph/Te x t Printer.”
5. Open the [Setup] → [Printer Preset] page, select “Report Print” from the printer list,
select the printer, and set properties.
6. Click [Save] to exit the preset and make the settings effective.
3.5.5 Installing the Printer Driver in Windows
Interface
Perform the following steps to install the printer driver in Windows interface as needed:
1. Connect the printer to the USB port on the ultrasound system.
2. Power the system and the printer on.
3. Enter [Setup]→[Maintenance]→[Setup]→[Enter Windows], input the password. For
details about obtaining password, please refer to "6.4 Enter Windows".
The system enters the Windows interface.
4. Copy the printer driver from external storage device onto the local disk.
5. Click “this PC” with left <Set> button, and click “Manage” on the pop-up menu to enter
the Computer Management interface.
NOTE: Unless otherwise specified, all the operations are performed with right <Set>
button.
To Next Page
Loading...
Need help?
General
