218Service Manual – SC5000 90 - Options and Accessories
Various Mechanical Kits
MMC Setup
None
Description The following kits are mechanical in nature and do not pose a direct impact on
serviceability beyond knowing they may be present.
Battery Watering Kit This kit includes tubing and caps necessary to facilitate adding water to all ooded
batteries simultaneously.
Mop Holder Kit This provides a mounting bracket to hold a mop or broom to the side of the
machine for off-machine usage.
Arm Rest Kit-R/H Only This is an operator comfort feature to add an arm rest to the operator’s seat.
Seat Belt Kit This is an operator safety feature to add a seatbelt to the operator’s seat.
Drain Hose Extension This is an extension of the machine’s existing drain hose to facilitate draining the
solution tank into a nearby oor drain.
Solution Auto Fill Kit This is a replacement cap for the existing solution tank cap to permit a direct
connection of a lling hose to the solution tank, which includes an automatic shutoff
of the water when the tank is lled.
Vacuum Wand Kit This is a mounting bracket and vacuum wand mounted on the recovery tank for
off-machine water suction. For operation, the main squeegee hose is disconnected
and reconnected to the wand, when the wand is used.
Squeegee Guard Kit This is a rear bumper attachment to protect the squeegee mechanism from
collision while backing the machine.
Foot Guard Kit This is a guard surrounding the operator’s foot pedal position to prevent
unexpected interference from low hanging obstacles while the operator is driving
the machine.
Heavy Duty Front
Bumper
Tubular steel front bumper that replaces the original at bumper on the front of
the machine.
Overhead Guard The overhead guard mounts to the solution tank and the heavy duty bumper.
Therefore, the front bumper is required for the overhead guard
To Previous Page
Loading...
Need help?
General
