Omron NJ501-1500 User Manual

2-125
2 Instruction Descriptions
NJ-series Instructions Reference Manual (W502)
Timer Instructions
2
TP
• If this instruction is not executed due to the execution of a jump instruction (e.g., the JMP instruction),
the value of ET is not updated and timing is not performed. Timing restarts when the instruction is
executed again.
• If this instruction is used in a ladder diagram, the value of Q changes to FALSE if an error occurs in
the previous instruction on the rung.

Omron NJ501-1500 Specifications

General

Brand	Omron
Model	NJ501-1500
Category	Controller
Language	English