Omron NJ501-1500 User Manual

2-657
2 Instruction Descriptions
NJ-series Instructions Reference Manual (W502)
Communications Instructions
2
ExecPMCR
IF (State=INT#3) THEN
IF (SCU_P1_PmrSeqEndSta=TRUE) THEN
State:=INT#4;
END_IF;
IF (SCU_P1_PmrSeqAbtSta=TRUE) THEN
State:=INT#5;
END_IF;
END_IF;
IF (State=INT#4) THEN
TmpData:=DWORD_TO_DINT(SHL(WORD_TO_DWORD(RecvData[3]), 16)
OR WORD_TO_DWORD(RecvData[2]));
State:=INT#0;
END_IF;
IF (State=INT#5) THEN
State:=INT#0;
END_IF;
// Processing after normal end.
// Processing after error end
// Confirm completion of ExecPMCR instruction execution.

Omron NJ501-1500 Specifications

General

Brand	Omron
Model	NJ501-1500
Category	Controller
Language	English