Omron NJ501-1500 User Manual

Relevant Manuals
2
NJ-series Instructions Reference Manual (W502)
Relevant Manuals
There are three manuals that provide basic information on the NJ-series CPU Units: the NJ-series CPU
Unit Hardware User’s Manual, the NJ-series CPU Unit Software User’s Manual (this manual), and the
NJ-series Instructions Reference Manual.
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac Stu-
dio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.
Other manuals are necessary for specific system configurations and applications.
Read all of the manuals that are relevant to your system configuration and application to make the most
of the NJ-series CPU Unit.
NJ-series User’s Manuals
Basic information
Introduction to NJ-series Controllers
Setting devices and hardware
Using motion control
Using EtherCAT
Using EtherNet/IP
Using CJ-series Units
Software settings
Using motion control
Using EtherCAT
Using EtherNet/IP
Programming
Using motion control
Using EtherCAT
Using CJ-series Units
Programming error processing
Testing operation and debugging
Using motion control
Using EtherCAT
Using EtherNet/IP
Maintenance
Using EtherCAT
Using EtherNet/IP
Using CJ-series Units
NJ-series CPU Unit Hardware User´s Manual NJ-series CPU Unit Software User´s Manual NJ-series Instructions Reference Manual NJ-series CPU Unit Motion Control User´s Manual
NJ-series CPU Unit Built-in EtherCAT Port User´s Manual
NJ-series Motion Control Instructions Reference Manual
NJ-series CPU Unit Built-in EtherNet/IP Port User´s Manual NJ-series Troubleshooting Manual CJ-series Special Unit Operation Manuals for NJ-series CPU Unit
Troubleshooting and managing
errors in an NJ-series Controller
Use the
relevant
manuals for
references
according to
any error that
occurs.

Omron NJ501-1500 Specifications

General

Brand	Omron
Model	NJ501-1500
Category	Controller
Language	English