Omron Q2A Series Technical Manual

11.1 How to Read the Parameter List
394 SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
11.1 How to Read the Parameter List
Icon Description
The parameter is available when operating the drive with V/f Control.
The parameters is available when operating the drive with Closed Loop V/f Control.
The parameter is available when operating the drive with Open Loop Vector Control.
The parameter is available when operating the drive with Closed Loop Vector Control.
The parameter is available when operating the drive with Advanced Open Loop Vector Control.
The parameter is available when operating the drive with Open Loop Vector Control for PM.
The parameter is available when operating the drive with Advanced Open Loop Vector Control for PM.
The parameter is available when operating the drive with Closed Loop Vector Control for PM.
The parameter is available when operating the drive with EZ Open Loop Vector Control.
Hex. Hexadecimal numbers that represent Modbus addresses to change parameters over network communication.
RUN The parameter can be changed during run.
Expert The parameter is available in Expert Mode only.
*1
*1 Set A1-01 = 3 [Access Level = Expert Parameters] to display and set Expert Mode parameters on the keypad.
Gray icons identify parameters that are not available in the specified control method.
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM OLV/PM
AOLV/PM
CLV/PM
EZOLV

Omron Q2A Series Specifications

General

Brand	Omron
Model	Q2A Series
Category	Controller
Language	English