Quantum Scalar i40 User Manual

Chapter 4: Configuring the Library
Working With LDAP User Accounts (Remote Authentication)
Quantum Scalar i40 and Scalar i80 User’s Guide 93
Figure 14 LDAP Setup Example
4 Click Apply to apply any changes.
If you enabled LDAP or modified LDAP
settings, the Test Settings
button is activated.
5 Click th
e Test Settings button to test all the new or changed LDAP
settings. See
Testing LDAP Settings on page 94 for more
information.
6 Save
the library configuration (see Saving the Library Configuration
on page 107).

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g