Quantum Scalar i40 User Manual

Chapter 5: Advanced Reporting
Automatically E-mailing Advanced Reporting Reports and Logs
134 Quantum Scalar i40 and Scalar i80 User’s Guide
9 Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.
Modifying a Recipient Web Client
1 Select Setup > Notifications > Advanced Reporting > Receiver
Addresses
.
The Setup - Advanced Reporting Receiver Addresses screen displays.
2 Click Modify.
3 Change any of the settings and click Apply.
4 On the Success window, click Close.
5 Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.
Deleting a Recipient Web Client
1 Select Setup > Notifications > Advanced Reporting > Receiver
Addresses
.
The Setup - Advanced Reporting Receiver Addresses screen displays.
2 Select a recipient and click Delete.
3 On the Confirmation window, click OK.
Save the library configuration. For instructions on how to save the
library configuration, see
Saving the Library Configuration on
page 107.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g