Quantum Scalar i40 User Manual

Chapter 3: Understanding the User Interface
Web Client
28 Quantum Scalar i40 and Scalar i80 User’s Guide
Figure 10 Using the Buttons to
Set the Date and Time
Web Client
The Web client interface is accessible from supported Web browsers (see
Supported Internet Browsers on page 347).
To access the library from a remote location, the library must be
conne
cted to your network via an Ethernet connection. Simply enter the
library’s IP address in your Internet browser bar to access the Web client.
See
Configuring Network Settings on page 40 for information on
setting the network configuration settings f
or remote use.
Tips Keep the following tips in mind when using the Web client:
• You must disable Web browser popup blockers to use the Web
client i
nterface and the library’s online Help. Add the Scalar i40 or
Scalar i80’s Internet Protocol (IP) address to the list of trusted/
allowed sites on your Scalar i40- or Scalar i80-supported browser, so
the Web client pages will automatically refresh.
• Do not use your Internet browser Bac
k button to navigate the Web
client pages. Instead, use the buttons provided within the Web
client.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g