Quantum Scalar i40 User Manual

Chapter 4: Configuring the Library
Registering the Library
Quantum Scalar i40 and Scalar i80 User’s Guide 109
Registering the Library
Registering the library activates the warranty. After completing the
initial setup of the library, choose Setup > Register Library on the Web
client to access the online product registration form.
You cannot register the library from the operator panel.
Web Client
Select Setup > Register Library.
Changing Operator Panel Home Screen View
From the operator panel, you may choose to change the default home
screen to an alternate home screen that facilitates easy I/E unlock
access, displays the number of I/E slots and the number of I/E slots that
are full.
Changes to the home screen can be made only from the operator panel.
Refer to
Figure 9 on page 23.
Changing to Alternate
Home Screen
1 Select Setup > System Settings and press Select.
2 Select Alternate Home and press Modify.
3 Select Up to choose Unlock I/E, and press Apply.
4 Select Exit twice to return to the alternate home screen.
Note: From the alternate home screen, selecting Menu returns you to
the default home screen. To return to the alternate home
screen, select Actions > Alternate Home, and press Select.
The Alternate Home Screen as shown in Figure 9 displays.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g