Quantum Scalar i40 User Manual

Appendix B: Tape Alert Flag Descriptions
350 Quantum Scalar i40 and Scalar i80 User’s Guide
Table 10 Tape Drive Tape Alert
Flag Descriptions
No. Flag Severity
Recommended Application Client
Message
Probable Cause
1 Read warning W The tape drive is having problems
reading data. No data has been lost,
but there has been a reduction in the
performance of the tape.
The drive is having
severe trouble
reading.
2 Write warning W The tape drive is having problems
writing data. No data has been lost, but
there has been a reduction in the
capacity of the tape.
The drive is having
severe trouble
writing.
3 Hard error W The operation has stopped because an
error has occurred while reading or
writing data which the drive cannot
correct.
The drive had a hard
read or write error.
4 Media C Your data is at risk:
1 Copy any data you require from this
tape.
2 Do not use this tape again.
3 Restart the operation with a different
tape.
Media can no longer
be written/read, or
performance is
severely degraded.
5 Read failure C The tape is damaged or the drive is
faulty. Call the tape drive supplier help
line.
The drive can no
longer read data
from the tape.
6 Write failure C The tape is from a faulty batch or the
tape drive is faulty:
1 Use a good tape to test the drive.
2 If the problem persists, call the tape
drive supplier help line.
The drive can no
longer write data to
the tape.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g