Quantum Scalar i40 User Manual

Chapter 6: Performing Library Operations
Logging Out
138 Quantum Scalar i40 and Scalar i80 User’s Guide
Logging in When LDAP
or Kerberos is Enabled
When LDAP or Kerberos is enabled, the Web client Login screen displays
a Remote Authentication check box. Log in as follows:
• Select the Remote Authentication check box to log in using a
directory service user name and password.
•Clear the Remote Authentication check box to log in using a local
user name and password.
For more information on LDAP, see Configuring LDAP on the Library on
page 90.
For more information on Kerberos, see Configuring Kerberos on
page 94.
Logging Out
Logging out secures the library from being accessed by unauthorized
users. Log out whenever you have finished accessing the library.
Note: You will only be able to log out of the operator panel if
passwords have been configured (see
Enabling and Creating
Passwords on the Operator Panel on page 84).
Note: Clicking the close button (X) in the upper-right corner of the
Web client closes the browser window but does not log you
out.
Note: All users are logged out automatically after a configurable
period of inactivity. The default timeout period is 15 minutes,
but you can change this (see
Setting the Session Timeout on
page 97).
Operator Panel
1 Select Actions > Logout.
2 Press Yes to confirm.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g