Quantum Scalar i40 User Manual

Chapter 5: Advanced Reporting
Working with the Media Security Log
126 Quantum Scalar i40 and Scalar i80 User’s Guide
4 To e-mail the report data as a .csv file, type the name of a recipient
in the empty field next to the
E-mail button, then click E-mail.
Figure 21 Saving and E-
mailing the Report Data
Working with the Media Security Log
Note: You must have an Advanced Reporting license to use this
feature.
Media removal is detected by the library when it performs an inventory
(at boot up, for example). The media security log lists media that have
been removed from the library. You can configure the library to collect
any or all of the following media removal events for the log.
• Unexpected Removal Detection After Power-up and Reboot Only
• Unexpected Removal Detection During Library Operation
• Expected Removal Detection From I/E Slots During Library Operation
Unexpected removal refers to tape cartridges that were removed from
the library without being exported properly via the I/E station.
Expected removal refers to tape cartridges that were exported properly
via the I/E station.
By default, all the options are disabled an
d the library collects nothing.
You must enable at least one of the options for the library to begin
collecting data. The log only lists media that is completely removed
from the library. It does not list media that moves from one location to
another within the library.

Quantum Scalar i40 Specifications

General

Power requirements	100 - 240 V AC, 50 - 60 Hz, 2.8/1.4 Amps
Power consumption (typical)	100 W
Expansion slots	25
Dimensions (WxDxH)	455 x 793 x 132 mm
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Product type	Storage auto loader & library
Product color	Black

Weight and Dimensions

Weight	15800 g