Supervisor
The supervisor can delete an administrator's password and specify a new one.
If any of the administrators forgets their password or if any of the administrators changes, the supervisor
can assign a new password. If logged in using the supervisor's user name and password, you cannot
use normal functions or specify defaults. The methods for logging in and out are the same as for
administrators.
• The default login user name is "supervisor". No login password is set up. We recommend changing
the login user name and login password.
• For the characters that can be used for login user names and passwords, see p.21 "Usable
characters for user names and passwords".
•
Be sure not to forget the supervisor login user name and login password. If you do forget them, a
service representative will have to return the machine to its default state. This will result in all data in
the machine being lost and the service call may not be free of charge.
• You cannot specify the same login user name for the supervisor and the administrators.
• Using Web Image Monitor, you can log in as the supervisor and delete an administrator's
password or specify a new one.
Resetting the Administrator's Password
1. The supervisor logs in from the control panel.
For details on how to log in, see p.22 "Administrator Login Method".
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ ] four times.
5. Press [Program/Change Administrator].
Supervisor
25
To Next Page
Loading...
Need help?
General
