• Depending on the settings configured for User Code authentication, users might be able to make
prints before logging in, regardless of the print volume limitation set by the administrator. Restrict all
functions in [User Code Authentication] in [User Authentication Management].
Specifying the Default Maximum Use Count
1. The machine administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ ] three times.
5. Press [Print Volum. Use Limit.: Default Limit Value].
[Print Volum. Use Limit.: Default Limit Value] does not appear if you have selected [Allow Continue
Use] in "Machine action when limit is reached".
6. Use the number keys to enter a value between "0" and "999,999" as the maximum
available print volume, and then press [ ].
7. Press [OK].
8. Log out.
Specifying the Maximum Use Count per User
1. The machine administrator logs in from the control panel.
2. Press [Address Book Mangmnt].
3. Restricting Machine Usage
86
To Next Page
Loading...
Need help?
General
