• Scanned files sent by e-mail
• Files sent by Scan to Folder
•
Documents sent using DeskTopBinder, the ScanRouter delivery software or Web Image
Monitor
• Network TWAIN scanner
Data scanned with network TWAIN scanner will not be overwritten by Auto Erase Memory.
However, If the "ADF(Read-ahead)" function is specified, data scanned with the network
TWAIN scanner will be stored on the hard disk, so will be overwritten by Auto Erase Memory.
Data Not overwritten by Auto Erase Memory
• Documents stored by the user in Document Server using the Copier, Printer, Facsimile or
Scanner functions
A stored document can only be overwritten after it has been printed or deleted from
Document Server.
• Information registered in the Address Book
Data stored in the Address Book can be encrypted for security. For details, see p.93
"Protecting the Address Book".
• Counters stored under each user code
Erase All Memory
You can erase all the data on the hard disk by writing over it. This is useful if you relocate or dispose of
your machine. The amount of time it takes to completely erase the memory depends on the machine type
being used. For information on machine types, see "Machine Types", Read This First.
• If you select "Erase All Memory", the following are also deleted: user codes, counters under each
user code, data stored in the Address Book, printer fonts downloaded by users, applications using
Embedded Software Architecture, SSL server certificates, and the machine's network settings.
• If the main power switch is turned off before "Erase All Memory" is completed, overwriting will be
stopped and data will be left on the hard disk.
•
Do not stop the overwrite mid-process. Doing so will damage the hard disk.
• We recommend that before you erase the hard disk, you use SmartDeviceMonitor for Admin to
back up the user codes, the counters for each user code, and the Address Book. The Address Book
can also be backed up using Web Image Monitor. For details, see SmartDeviceMonitor for Admin
Help or Web Image Monitor Help.
• Other than pausing, no operations are possible during the "Erase All Memory" process. When
"Random Numbers" is selected and it is set to overwrite three times, take a maximum of 3 hours, 30
minutes.
4. Preventing Leakage of Information from Machines
110
To Next Page
Loading...
Need help?
General
