SNMPv3 Encryption
When using SmartDeviceMonitor for Admin or another application to make various settings, you can
encrypt the data transmitted.
By making this setting, you can protect data from being tampered with.
1. The network administrator logs in from the control panel.
2. Press [System Settings].
3. Press [Interface Settings].
4. Press [Network].
5. Press [ ] three times.
6. Press [Permit SNMPv3 Communication].
7. Press [Encryption Only].
8. Press [OK].
9. Log out.
• To use SmartDeviceMonitor for Admin for encrypting the data for specifying settings, you need to
specify the network administrator's [Encryption Password] setting and [Encryption Password] in
[SNMP Authentication Information] in SmartDeviceMonitor for Admin, in addition to specifying
[Permit SNMPv3 Communication] on the machine. For details about specifying [Encryption
Password] in SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
5. Enhanced Network Security
174
To Next Page
Loading...
Need help?
General
