Ricoh AFICIO MP C305SP User Manual

Select either Kerberos, DIGEST, or Cleartext authentication.
• User Name
You do not have to enter the user name if the LDAP server supports "Anonymous
Authentication".
•
Password
You do not have to enter the password if the LDAP server supports "Anonymous
Authentication".
For details about registering an LDAP server, see "Programming the LDAP server", Connecting the
Machine/ System Settings.
• For the characters that can be used for login user names and passwords, see p.21 "Usable
characters for user names and passwords".
• When you select Cleartext authentication, LDAP Simplified authentication is enabled. Simplified
authentication can be performed with a user attribute (such as cn, or uid), instead of the DN.
•
In LDAP simple authentication mode, authentication will fail if the password is left blank. To allow
blank passwords, contact your service representative.
• Under LDAP authentication, if "Anonymous Authentication" in the LDAP server's settings is not set to
Prohibit, users who do not have an LDAP server account might still be able to gain access.
• If the LDAP server is configured using Windows Active Directory, "Anonymous Authentication"
might be available. If Windows authentication is available, we recommend you use it.
• The first time an unregistered user accesses the machine after LDAP authentication has been
specified, the user is registered in the machine and can use the functions available under the
available functions during LDAP authentication. To limit the available functions for each user,
register each user and corresponding the available functions setting in the Address Book, or specify
the available functions for each registered user. The available functions setting becomes effective
when the user accesses the machine subsequently.
• To enable Kerberos for LDAP authentication, a realm must be registered beforehand. The realm
must be programmed in capital letters. For details about registering a realm, see "Programming the
Realm", Connecting the Machine/ System Settings.
• Transmission between the machine and the KDC server is encrypted if Kerberos authentication is
enabled. For details about specifying encrypted transmission, see p.179 "Kerberos Authentication
Encryption Setting".
Specifying LDAP Authentication
Before beginning to configure the machine, make sure that administrator authentication is properly
configured under "Administrator Authentication Management".
2. Configuring User Authentication
52

Ricoh AFICIO MP C305SP Specifications

General

Brand	Ricoh
Model	AFICIO MP C305SP
Category	All in One Printer
Language	English