International TX Mode
If you set the International TX mode to [On], the machine sends faxes at lower speed. This improves the
chances of successful reception, but increases the time required for sending.
To send a fax using International TX Mode, you must first set the International TX mode to [On] and
register the destination in the Address Book. For details about how to register destinations for
International TX Mode, see “Registering Addresses and Users for Facsimile/Scanner Functions”,
Network and System Settings Reference.
Selecting Destinations from Recent Destinations
The machine stores the latest destinations specified for each transmission method.
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination again.
• The following kinds of destinations are not stored:
• Destinations specified using the destination list
• Destinations specified as a group destination
• Destinations specified under Memory File Transfer
• Destinations selected from Recent Destinations (regarded as already stored in memory)
• Second and later destinations broadcasted to
• Destinations specified in the LAN-Fax Driver on the computer
• Folder destination
1. Place the original, and then select the scan settings you require.
2. Press [Recent].
1. Transmission
104
To Next Page
Loading...
Need help?
General
