5. If the password is programmed, enter a password using the number keys, and then press
[OK].
If you make a mistake, press [Clear], and then try again.
6. Press [Delete].
To cancel deleting a box, press [Do not Delete]. The display returns to that of step 4.
7. Press [Exit].
8. Press the [User Tools/Counter] key.
Programming/Changing Information Boxes
This section describes how to set up an Information Box.
You can store the following items:
• Box Name (required)
Up to 20 characters long.
• SEP Code (required)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
• Password (optional)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
When programming a password, a mark is displayed before the Box name.
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Box Setting].
4. Check that [Program / Change] is selected.
Box Settings
403
To Next Page
Loading...
Need help?
General
