Ricoh SP 5200S User Manual

4. Press [SUB Code Transmission] to highlight it.
To cancel a SUB Code Transmission, press [SUB Code Transmission] again.
5. Press [OK] twice.
6. Specify the destination, and then press the [Start] key.
• For details about specifying SUB Codes, see the following:
• To specify SUB Codes in “Adv.Features”, see “Setting SUB Codes for Transmission”.
• To register SUB Codes in the Address Book, see “Registering Addresses and Users for
Facsimile/Scanner Functions”, Network and System Settings Reference.
• To register SUB Codes in Keystroke Programs, see “Registering and Changing Keystroke
Programs”.
• You can program one of the Quick Operation keys with operations for this function. Using the
Quick Operation Key allows you to omit steps 2, 3, and 5. For details about Quick Operation Key,
see “General Settings”.
• p.143 "Setting SUB Codes for Transmission"
• p.335 "General Settings"
• p.414 "Registering and Changing Keystroke Programs"
SEP Code Reception
Enable this function to perform SEP Code Reception.
• This function is not available with Internet Fax and e-mail.
• To perform SEP Code Reception, a SEP Code must be set in [Adv.Features], the Address Book, or
Keystroke Programs in advance. Otherwise, even if “SEP Code Reception” is set to on, reception is
not performed.
2. Other Transmission Features
184
2

Ricoh SP 5200S Specifications

General

Brand	Ricoh
Model	SP 5200S
Category	All in One Printer
Language	English