Sending by IP-Fax (IP-Fax Destinations)
This section explains how to specify a destination using IP-Fax transmission.
When using IP-Fax transmission, specify the IP-Fax destination (IP address, host name, or alias
telephone number) in place of the fax number.
• When sending an IP-Fax, select either “SIP” or “H.323” as the protocol.
• To display “SIP” and “H.323” on the screen, make the settings in “Initial Settings” in the Facsimile
Features menu. If you are using SIP, specify “Enable SIP” and “SIP Settings”. If you are using H.
323, specify “Enable H.323” and “H.323 Settings”. For details about these settings, see “Initial
Settings”.
• Ask your administrator whether you should select “SIP” or “H.323” as the protocol.
1. Make sure that [Fax] is selected.
2. Press [Select Line].
3. Select the protocol you want to use, and then press [OK].
Specifying a Destination
81
To Next Page
Loading...
Need help?
General
