Checking Transmission Using LAN-Fax Driver
From Web Image Monitor, you can check information about files sent using LAN-Fax Driver.
For the maximum number of transmission results you can check, see “Maximum Values”.
• The job history may differ from the machine's transmission results. In that case, refer to the machine's
transmission results.
• See the Web Image Monitor's Help for details.
• p.427 "Maximum Values"
Confirming Transmission Results by E-mail
After communicating in the LAN-Fax mode, this function transmits the communication results with the
computer by e-mail.
When you have done [Send] or [Send & Print] using the LAN-Fax, and when the communication was
successful, it transmits e-mail of the transmission result.
Result notification e-mail is sent when printing is complete, or if an error occurs during communication
between this machine and a computer.
1. Click the [E-mail Settings] tab.
2. Select the [Notify] check box under [E-mail TX results].
3. Enter the destination.
When entering the e-mail address directly, click the [Specify destinations] radio button, and then
enter the e-mail address in the [Specify destinations] field.
When entering the machine's programmed address, click the [Device Address] radio button, and
then enter the registration number of the Destination key in the [Device Address] box.
The [Device Address] box is unavailable when [Specify destinations] is selected, and you cannot
enter anything in the text box.
4. Click [Send] or [Send & Print].
• You can confirm transmission results using the E-mail TX Results function and the Communication
Result Report. You can set whether to use both of these together in User Parameter (switch 10, bit
6) in the Facsimile Features menu. See “Parameter Settings”.
• If there be any insufficient configurations of the Internet Fax transmission on this machine, or if “Auto
Specify Sender Name” is set to “Off”, the E-mail TX results or LAN-Fax result notification e-mail is
not transmitted, and the TX results report or LAN-Fax Result Report is printed. See “Connecting the
6. Fax via Computer
314
To Next Page
Loading...
Need help?
General
