Machine”, Network and System Settings Reference for the Internet Fax settings, and see “LAN-Fax
Result Report” for the LAN-Fax Result Report.
• p.315 "LAN-Fax Result Report"
• p.375 "Parameter Settings"
LAN-Fax Result Report
This section explains the LAN-Fax Result Report.
If “E-mail TX results” is set to “Notify”, if there be any insufficient configurations of the Internet Fax
transmission on this machine, or if “Auto Specify Sender Name” is set to “Off”, the E-mail TX results or
LAN-Fax result notification e-mail is not transmitted, and the TX results report or LAN-Fax Result Report is
printed. If the “E-mail TX Results” of “Sender Name” has not been set to on, the LAN-Fax Result Report is
printed.
• Whether or not the LAN-Fax Result Report is printed, can be configured with User Parameter
(Switch 20, bit 0) in the Facsimile Features menu. See “Parameter Settings”.
• When executing [Send] or [Send & Print] with LAN-Fax Driver, and when the E-mail TX Result
Report has not arrived, the Communication Result Report is printed. For details about
Communication Result Report, see “Communication Result Report (Memory Transmission)”.
• p.245 "Communication Result Report (Memory Transmission)"
• p.375 "Parameter Settings"
Printing and Saving
You can print documents created using Windows applications.
Open the application document you want to print or create a new document, and then perform the
following procedure.
1. On the [File] menu, click [Print...].
2. Select [LAN-Fax M14] in the list, and then click [Print].
The [LAN-Fax] dialog box appears.
The setting method may differ depending on the application you are using. In all cases, select
[LAN-Fax M14] for the printer.
Sending Fax Documents from Computers
315
To Next Page
Loading...
Need help?
General
