• p.150 "SEP Code RX Result Report"
• p.172 "Confirming Transmission Results by E-mail"
• p.245 "Communication Result Report (Memory Transmission)"
• p.246 "Immediate TX Result Report (Immediate Transmission)"
• p.335 "General Settings"
Confirming by Report and E-mail
You can confirm transmission results using both the E-mail TX Results function, which sends the results by
e-mail, and the Communication Result Report printed by the machine.
You can set whether to use both of these together in User Parameter (switch 10, bit 6) in the Facsimile
Features menu. See “Parameter Settings”.
• p.375 "Parameter Settings"
Communication Result Report (Memory Transmission)
This report is printed when a Memory Transmission is completed, so you can check the result of the
transmission.
• You can turn this function on or off with the User Parameter (switch 03, bit 0) in the Facsimile
Features menu.
• If user authentication is set, you can select whether to display a sender name with the User
Parameter (switch 04, bit 5) in the Facsimile Features menu.
• You can select whether to include part of the original image on the report with the User Parameter
(switch 04, bit 7) in the Facsimile Features menu.
• If user authentication is set, you can select whether to display a destination with the User Parameter
(switch 04, bit 4) in the Facsimile Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• The Pg(s) column gives the total number of pages. The Page Not Sent column gives the number of
pages that could not be sent successfully.
• “--” indicates that the e-mail or Internet Fax document was sent to the mail server programmed in
this machine. (However, this does not mean the e-mail was delivered.)
• To view the report without text disruption, select a font of even character width in your e-mail
application's settings.
Checking the Transmission Result (Transmission File Status)
245
To Next Page
Loading...
Need help?
General
