Chapter
1
15
Overview
Introduction
This manual describes the functions and operation of the
XVS-8000 Multi Format Switcher system.
It describes picture creation and configuration settings
using the ICP-X7000 Integrated Control Panel.
System configuration devices
The principal components of the XVS-8000 system and
the terms used in this manual are as follows.
Signal format notation
The signal formats in the menu and this manual are
denoted as given below.
a) SMPTE ST 425-5, Level A, 2-sample interleave (2SI) division compliant.
b) SMPTE ST 425-1, Level A compliant.
About screenshots and illustrations
The display of operation buttons and menu screens vary,
depending on the system configuration.
Configuration
device
Terms used in this manual
XVS-8000 Multi
Format Switcher
• XVS-8000
•Switcher
• Multi format switcher
ICP-X7000
Integrated Control
Panel
• ICP-X7000
• Control panel
• Integrated control panel
PWS-100SC1
Switcher Control
Station
• PWS-100SC1
•SCS
• Switcher control station
XKS-8470 HD
DME Board
• XKS-8470
•DME
• DME board
MKS-X7700
System Interface
Unit
• MKS-X7700
•SIU
• System interface unit
MKS-X2700
System Interface
Unit
• MKS-X2700
•SIU
• System interface unit
Format terms Format name
4K format 3840×2160P • 3840×2160P/59.94
a)
• 3840×2160P/50
a)
QFHD
HD format 1080P • 1080P/59.94
b)
• 1080P/50
b)
1080PsF • 1080PsF/29.97
• 1080PsF/25
• 1080PsF/24
• 1080PsF/23.98
1080i • 1080i/59.94
• 1080i/50
720P • 720P/59.94
• 720P/50
Format terms Format name