121
Resizer
The resizer is a function that applies effects, such as image
reduction/enlargement, movement, rotation, and changes
in aspect ratio, to the generated key.
The following operations are available.
• Two-dimensional transforms of keys (see page 121)
• Key rotation on the x- or y-axis (see page 123)
• Resizer interpolation settings (see page 124)
• Resizer crop/border settings (see page 124)
• Resizer CG border settings (see page 125)
• Resizer effect settings (see page 126)
(wide key border, drop shadow, edge enhance, mosaic,
defocus, mask)
This section describes setting the resizer of key 1 on the M/
E-1 bank as an example.
• The image of the key manipulated by resizer has a one-
frame delay.
• Some effects of resizer are different from what you
would expect of DME effects.
• There are restrictions on the combined use of resizer
effects themselves and use with DME wipes (see
page 126)
.
• You cannot use DME effects on a key for which the
resizer function is enabled. When one of the three
functions – resizer, DME wipe and DME effects – is
enabled, the other two are disabled.
Two-Dimensional Transforms and
Rotation of Keys
When the screen aspect ratio is 4:3 in HD format, reducing
an image using the resizer reduces the 16:9 image as-is
with the added image portions on the left and right sides.
Use the crop function as required to extract the 4:3 image.
Reducing, enlarging, rotating, and moving
keys (menu)
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
Set the following parameters.
a) When [X] is selected in the <Rotation> group.
b) When [Y] is selected in the <Rotation> group.
Reducing, enlarging, rotating, and moving
keys (key control block)
For details about buttons and parameters on the key
control block, see “Key Operations (Key Control Block)”
(page 116).
Key control block
1
Press a delegation button to select the target keyer.
Press the [M/E1] button, turning it on, and press the
[KEY1] button, turning it on.
Notes
Note
Parameter group [1/2]
No. Parameter Adjustment
1 Location X Horizontal key movement
2 Location Y Vertical key movement
3 Size Key reduction/enlargement
4
a)
Rotation X Horizontal key rotation
4
b)
Rotation Y Vertical key rotation
5 Perspective Perspective
Parameter group [2/2]
No. Parameter Adjustment
1 Aspect X Change aspect ratio horizontally
2 Aspect Y Change aspect ratio vertically
3 Aspect
Ratio
Change aspect ratio horizontally
and vertically simultaneously
Delegation buttons
PAGE button
RSZR button
Setting buttons
To Next Page
Loading...
Need help?
General
