Sony XVS Series User Manual

140
3 Set the following parameters.
Wipe patterns and supported modifiers
Yes: Available, No: Not available
a) Pattern numbers 1 to 16, 19, and 20 are not available.
b) Pattern numbers 300 to 303 are not available.
c) Pattern numbers 100 to 103, 150, 151, 516, 518, 604, and 606 are not
available.
d) Pattern numbers 1 to 8, 17, and 18 are not available.
e) Pattern numbers 220 to 223 are not available.
f) Pattern numbers 19 and 20 are not available.
g) Pattern numbers 21, 23, and 24 are available.
h) Pattern numbers 21 and 23 are available.
Wipe Modify Clear
Press [Default Recall] at the lower left of the menu display,
turning it on, then press the VF5 button ([Wipe]) to return
the wipe settings to their initial status.
For details about initial status, see “Power-On (Startup)
State Selection” (page 366).
Basic Independent Key
Transition Wipe Setting
Operations
You configure independent key transition wipe settings
using the Wipe Adjust menu for each keyer.
For details about independent key transitions, see
“Independent Key Transitions” (page 92).
This section describes operations of key 1 on the M/E-1
bank (M/E-1 >Key1 >Transition/Video Process >Wipe
Adjust menu) as an example.
Selecting an Independent Key
Transition Wipe Pattern
In an independent key transition, you can only use the
standard wipe patterns (pattern numbers 1 to 24).
1 In the M/E-1 >Key1 >Transition/Video Process menu
(1117), press [Wipe Adjust].
The Wipe Adjust menu (1117.1) appears.
2 Press [Pattern Select].
The Pattern Select menu (1117.2) appears.
3 Press the desired pattern to select it.
Setting Independent Key Transition
Wipe Modifiers
You can use the following modifiers in an independent key
transition wipe.
However, the available modifiers may depend on the
pattern you are using.
• Direction
• Soft edge
• Positioner
•Rotation
•Aspect
•Multi
No. Parameter Adjustment
1 Magnitude Size and direction of the spiral
• A value of –100.00 represents
the maximum movement in the
counterclockwise direction.
• A value of +100.00 represents
the maximum movement in the
clockwise direction.
2Wave
Speed
Speed of the lateral waves
• Negative values set the speed
from the left.
• Positive values set the speed
from the right.
Modifiers Type of wipe
Standard Enhanced Rotary Mosaic Random/
diamond
dust
Direction
Ye s Ye s Ye s Ye s Ye s
Split Ye s Ye s N o Ye s Ye s
Edge Ye s Ye s Ye s Ye s Ye s
Positioner Ye s
a)
Ye s
b)
Ye s
c)
No No
Rotation Ye s Ye s Ye s
c)
No No
Aspect Ye s
d)
Ye s N o N o N o
Multi Ye s Ye s Ye s Ye s
e)
No
Pairing Ye s
f)
Ye s N o N o N o
Modulation
(H, V)
Ye s Ye s Ye s N o N o
Modulation
(Fringe)
No
g)
Ye s N o N o N o
Spring No
g)
Ye s N o N o N o
Spiral No
h)
Ye s N o N o N o
Note

Sony XVS Series Specifications

General

Brand	Sony
Model	XVS Series
Category	Switch
Language	English